Sharp Aquos LC-42LE540U Operation Manual page 35

On-Screen Display Menu
3
Press ENTER to start checking the data in the USB
memory device.
Insert the USB memory device
containing the software update file.
4
During the data checking, "Checking" blinks.
Now checking the data
in the USB memory device.
• The current version of the TV software and the version
of the update fi le on the USB memory device are
displayed.
Example
Software update file is detected
in the USB memory device.
Current Version
Update Version
Yes
• If the USB memory device is not properly installed or
the correct update fi le cannot be found on the USB
memory device, an error message is displayed.
Check the fi le on the USB memory device, and then
reinsert the USB memory device correctly.
Software update file is not detected in the USB memory device.
Confirm that you have transferred the file
to the USB memory device and retry software update.
5
To update the TV software with the update fi le,
select "Yes", and then press ENTER.
Software update file is detected
in the USB memory device.
Start update?
Current Version
Update Version
Yes
Example
Now updating
Update Version
Remote Control operation is disabled during Update process.
Do not unplug AC cord.
OK
Checking
Start update?
: UXXXXXX1
: UXXXXXX2
No
OK
: UXXXXXX1
: UXXXXXX2
No
: UXXXXXX2
30%
CAUTION
• Do not remove the USB memory device or unplug
the AC cord while the software is being updated.
6
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
Example
Software update is complete.
Update Version
• If the update has failed, check the fi le in the USB
memory device and try Software Update again.
Failed to complete update.
Retry Software Update.
If system Update fails again,
contact the customer service center.
Update Version
7
Please remove the USB memory device. Press
ENTER. the TV automatically turns off and then
turns on again.
System software was successfully update.
Remove the USB memory device.
Press [Enter], the TV automatically turns off
and then turns on again.
Netflix Help
1
Press MENU to display the menu screen.
2
Press c / d to select "Information", and then press
ENTER.
3
Press a / b to select "Netflix Help", and then press
ENTER.
4
Press c / d to select "OK/Deactivate", and then
pressENTER.
• To confirm the Netflix status, check the information
displayed on the screen and click "OK".
VUDU Help
1
Press MENU to display the menu screen.
2
Press c / d to select "Information", and then press
ENTER.
3
Press a / b to select "VUDU Help", and then press
ENTER.
4
Press c / d to select "Yes/No", and then press
ENTER.
: UXXXXXX2
OK
: UXXXXXX2
OK
OK
33