Using The Delay Start Function - Samsung WF457ARGSWR/AA User Manual

Washing a load of laundry
7. The My Cycle "None1" is changed to "J's
Wash" in the My Cycle list on the Cycle
Selection screen.
Starting a My Cycle
Follow the steps below to start a My Cycle to wash your laundry.
1. Tap the My Cycle button in the Cycle Selection screen. It will expand and show a list of 3
My Cycle buttons.
2. Tap a My Cycle button.
3. Press the Start/Pause button to start your wash.

Using the Delay Start function

By activating the Delay Start function, you can set your washer to start your wash automatically
at a specifi ed later time.
Activating
Follow the steps below to activate the Delay Start function.
1. Tap the Delay Start OFF ( (
at the bottom right of the Cycle Selection
screen. The Delay Start screen is displayed.
2. Tap the up / down arrows to set a time.
3. If the Smart Grid function is available, you can allow your washer to fi nd the most energy
effi cient time (called the most eco-friendly time) to run your wash within a range of the time
you set.
4. Tap the OK button to activate the Delay Start function with the options you set.
Tap the Cancel button to cancel the function.
5. You are returned to the Cycle Selection screen. You will see that the Delay Start OFF ( (
button has been changed to the Delay Start ON ( (
Deactivating
Follow the steps below to deactivate the Delay Start function.
1. Tap the Delay Start ON ( (
screen. The Delay Start function is deactivated and the button changes to the
Delay Start OFF ( (
36_ Washing a load of laundry
WF457ARG-03153A-04_EN.indd 36 WF457ARG-03153A-04_EN.indd 36
) button located
) button located at the bottom right of the Cycle Selection
) button.
) button.
)
2012-08-31 2012-08-31 12:30:26 12:30:26