Changing The Interior Lights; Changing The Water Filter - Samsung RSG257AARS/XAA User Manual

operating the SAMSUNG side-by-side
refrigerator

CHANGING THE INTERIOR LIGHTS

Pull the power plug out of the socket before changing the interior light of the refrigerator.
- Otherwise, there is a risk of electric shock.
WARNING
If you experience diffi culty when changing the light, contact your service center.
Changing the LED Type Lighting
Do not disassemble or replace the LED type Lighting.
To change the LED Type Lighting, contact a Samsung service center.
CAUTION

CHANGING THE WATER FILTER

To reduce risk of water damage to your property DO NOT use generic brands of water fi lers
in your SAMSUNG Refrigerator. USE ONLY SAMSUNG BRAND WATER FILTERS.
WARNING
SAMSUNG will not be legally responsible for any damage, including, but not limited to
property damage caused by water leakage from use of a generic water fi lter.
SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter.
The "Filter Indicator" light lets you know when it is time to change your water fi lter cartridge. To give you
preparation time to get a new fi lter, the red light will come on just before the capacity of the current fi lter
runs out. Changing the fi lter on time provides you with the freshest, cleanest water from your fridge.
1. Remove the water fi lter from the box and put a month indicator sticker on the fi lter as shown.
Place a sticker on the fi lter that dates six months in the future. For example, if you are
replacing the water fi lter in March, put the "SEP" (September) sticker on the fi lter to remind
you to replace in September. Normal fi lter life is about every 6 months.
2. Remove the new fi lter's protective cap and remove the old fi lter.
3. Position and insert the new fi lter into the fi lter housing.
Slowly turn the water fi lter clockwise to align with the printing mark on the cover, locking
the fi lter in position. Make sure to align the water fi lter label mark with the center of cover
fi lter printing as illustrated. Remember, do not over-tighten.
26_ operating
1
2
Sticker
(month indicator)
Cover fi lter Cover fi lter
3
Turn until the label
aligned.