Samsung Rugby Smart SGH-I847 User Manual page 143

Turning Wi-Fi On
By default, your device's Wi-Fi feature is turned on. Active
Wi-Fi makes your device able to discover and connect to
compatible in-range WAPs.
1. From the Home screen, tap
and network Wi-Fi settings.
2. Tap the Wi-Fi field to activate the feature. A green
checkmark indicates that Wi-Fi is active. The device
will scan for available in-range wireless networks and
display them under Wi-Fi networks on the same
screen.
Connect to a Wi-Fi Network
1. From the Home screen, tap
and network Wi-Fi settings.
The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi
networks are displayed in the Wi-Fi networks section.
2. Tap the network you want to connect to.
Settings Wireless
Settings Wireless
Note: When you select an open network, you will be
automatically connected to the network.
3. Enter a wireless password if necessary.
Manually add your new network connection
1. Tap Add Wi-Fi network.
2. Enter the Network SSID. This is the name of your
Wireless Access Point.
3. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
4. If secured, you will also need to enter your WAP's
password.
5. Tap Save to store the new information and connect to
your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
Connections 137