Allow Mock Locations - Samsung SGH-I777 User Manual

Development Device ID
The identification number for your device when using it as a
development tool displays in this field.

Allow Mock Locations

This setting is used by developers when developing
location-based applications.
Note: This setting is used for development purposes.
1. From the Home screen, tap
Developer options.
2. Tap Allow mock locations to enable or disable the
setting.
When enabled, a check mark appears in the check box.
Desktop Backup Password
Protect the desktop with a backup password ID.
1. From the Home screen, tap
Developer options.
2. Tap Desktop backup password.
3. In the Settings screen, enter the current full backup
password, the new password for full backups, then
enter the new password again.
User Interface Options
Settings
Settings
4. Tap Set backup password to save the password
change.
Configure the user interface by setting the behavior for the
way the screen behaves when using applications or
displaying data.
1. From the Home screen, tap
Developer options.
2. Tap the check box next to each option to enable:
• Strict mode enabled: Makes the screen flash when
applications perform long operations on the main thread.
• Show pointer location: Highlights the data that was touched
on the screen.
• Show touches: Displays touch interactions on the screen.
• Show screen updates: Areas of the screen flash when they
update.
• Show CPU usage: Screen highlights the current CPU usage.
• Force GPU rendering: Uses a 2D acceleration in applications.
• Window animation scale: Configure the scale for animation
(ranges from off to 10x).
Settings
Changing Your Settings 137