Preprinted Paper - Samsung CLX-3305FN User Manual

Media and tray

Preprinted paper

When loading preprinted paper, the printed side should be facing up with an
uncurled edge at the front. If you experience problems with paper feeding, turn
the paper around. Note that print quality is not guaranteed.
• Must be printed with heat-resistant ink that will not melt, vaporize, or
release hazardous emissions when subjected to the machine's fusing
temperature for 0.1 second (about 170°C (338°F)).
• Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
• Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper, reducing
print quality.
5
Setting the paper size and type
After loading paper in the paper tray, set the paper size and type using the
control panel buttons.
• You can set the machine's settings by using the
Samsung Easy Printer Manager
- For Windows and Macintosh users, you set from Samsung Easy
Printer Manager >
Settings, see "Device Settings" on page 258.
• It may be necessary to press
some models.
It may be necessary to press OK to navigate to lower-level menus for some
models.
Select (Menu) button on the control panel.
1
Press System Setup > Paper Setup > Paper Size or Paper Type.
2
3 Select the tray and the option you want.
4 Press OK to save the selection.
Device Settings in
program.
(Switch to advanced mode) > Device
OK to navigate to lower-level menus for
2. Menu Overview and Basic Setup
48