Samsung CLP-680ND User Manual page 98

Understanding display messages
Message Meaning
Calibrating The machine is calibrating
the image density.
image density...
Door Open The cover is not securely
latched.
Close it
Error [error The indicated toner
number] cartridge is installed
improperly, or the
Install [color]
connector is polluted.
toner
Error [error The machine unit cannot
number] be controlled.
Turn off then on
Error [error
number]
Call for service
Install TR. The transfer belt is not
installed.
belt unit.
Not compatible The transfer belt of the
machine is not for your
transfer belt
machine.
Suggested solutions
Wait a few minutes.
Close the cover until it locks
into place.
Reinstall the Samsung-
genuine toner cartridge two
or three times to confirm it is
seated properly. If the
problem persists, please call
for service.
Reboot the power and try the
printing job again. If the
problem persists, please call
for service.
Install a Samsung-genuine
transfer belt.
Install the a Samsung-
genuine part designed for
your machine.
Message Meaning
Not installed The is waste toner
container not installed.
Waste tank
Not proper room The machine is in a room
with improper room
temp. Move set
temperature.
Output bin Full The output tray is full.
Remove paper
Prepare new The life of the transfer belt
will expired soon.
Transfer belt
Replace new The life of the transfer belt
has expired.
Transfer belt
Replace The life of the fuser unit will
be expired soon.
Fuser Soon
Replace new The life of the fuser unit will
be expired.
Fuser unit
• Replace new The life of the tray pick-up
roller will expired soon.
Tray1 roller
• Replace new
The life of the tray pick-up
Tray2 roller
roller will expired.
Suggested solutions
Install a Samsung-genuine
waste toner container.
Move the machine to a room
with proper room
temperature.
Remove papers from the
output tray, the machine
resumes printing. If the
problem persists, call for
service.
Replace the transfer belt with
a new one. If the problem
persists, please call for
service.
Replace the fuser unit with a
new one. If the problem
persists, please call for
service.
Replace the tray pick-up roller
with a new one. If the
problem persists, please call
for service.
99
4. Troubleshooting