Samsung CLP-680ND User Manual page 34

Media and tray
• When printing the special media, you must follow the loading guideline
(See "Printing on special media" on page 35).
• When papers overlap when printing using multi-purpose tray, open tray
1 and remove overlapping papers then try printing again.
4 When you print a document, set the paper type and size for the multi-
purpose (or manual feeder) tray (see "Setting the paper size and type" on
page 40).
The settings made from the machine driver override the settings on the
control panel.
a To print in application, open an application and start the print menu.
b Open Printing Preferences (See "Opening printing preferences" on
page 43).
c Press the Paper tab in Printing Preferences, and select an appropriate
paper type.
For example, if you want to use a label, set the paper type to Label.
d Select Manual Feeder (or MP Tray) in paper source, then press OK.
e Start printing in application.
If your machine has multi-purpose tray, press OK on the control panel
each time you load a sheet of paper.
4
Printing on special media
The table below shows the special media usable in tray.
The media is also shown in the Printing Preferences. To get the highest
printing quality, select the proper media type from the Printing preferences
window > Paper tab > Paper Type (see "Opening printing preferences" on page
43).
For example, if you want to print on labels, select Labels for Paper Type.
• When using special media, we recommend you feed one sheet at a time
(see "Print media specifications" on page 104).
• Illustrations on this user's guide may differ from your machine
depending on its options or models. Check your machine type (see
"Front view" on page 17).
To see for paper weights for each sheet, refer to "Print media specifications" on
page 104.
Types Tray 1
●
Plain
●
Thick
●
Thicker
Manual feeder/ Multi-
a
Optional tray
purpose tray
● ●
● ●
●
2. Menu Overview and Basic Setup
35