Samsung STB-E7900M User Manual page 23

Audio
Digital Output
PCM Downsampling
Dynamic Range Control
Downmixing Mode
Audio Sync
Set Digital output option suitable for your TV or AV
Receiver. For more details, please refer to the digital
output selection table. (See page 66)
Set whether to use downsampling processing or not.
Set Dynamic Range Control option for Dolby Digital and
Dolby Digital Plus.
 Off : You can enjoy original sound without
compressing Dynamic Range of the sound.
 On : The Dynamic Range is compressed appropriately
by boosting low level sound and reducing extremely
loud sound.
| NOTE |
\ This Setting is not applied to HDMI and Optical output in
case of "Digital Output" setting is "Bitstream(Unprocessed)"
and the "Audio Description" is set to "Off".
\ This Setting is not applied when you are watching DTV
Program.
Select Downmix method for stereo output.
In some cases when the product is connected to a
digital TV, the audio signal may not synchronize with the
video signal. If this occurs, adjust the audio delay time
to match the video signal.
• You can set the audio delay time between 0 msec
and 200 msec.
Adjust it to the optimal setting.
| NOTE |
\ The audio delay time you specify may not be exact depending
on the played content.
23
|
English