• The Philips home charging station requires a properly grounded outlet for safety and to protect the connected equipment. If you are not sure whether your home’s electrical wiring has proper grounding, consult a qualified electrician.
Page 4
2 Your home charging station Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. Overview a Non-slip panel b POWER button c AC outlet d Power cord e LED f USB charging port...
3 Get started Warning • To avoid any potential hazard, use the power source supplied by your local authorities. Put the home charging station on a flat surface. Plug the home charging station into a properly grounded outlet.
4 Charge your Note devices • Each USB charging port is controlled by a related USB charging configuration switch. You can set the switch to A for charging iPod, iPhone and iPad and set the switch to B for other USB devices. Set the USB charging configuration switch to A or B. Charge from AC outlet There are two AC outlets in this home charging station.
5 Other features Tidy up cables You can tidy up your cables and make them neat with cable clips. Lift up the non-slip panel. Route your cables through the cable clips. Fix the cable clips onto the home charging station freely. Use the slide-out tray The slide-out tray can hold the charged device securely.
Philips; (c) or resulting from modification of the surge protector. After any repair or modification of the surge protector by a facility not authorized by Philips, any problems that arise will not be remedied under this warranty. These warranties extend only to the original purchaser of the product, and are not transferable.