Using Your Dco7; Using The Tools - Dyson DCo7 User Manual

6057-DCO7 OPS MAN (UPDATE) 10/23/01 12:26 PM Page 4
DCO7 silver/yellow is not
recommended for hard
floors: accessory tools are
ideal. The brushbar
continues to rotate while
the hose is in use.
Ensure hair and loose
clothing are kept clear of
wand cap/brush bar when
machine is switched on.

Using your DCO7

Plug in at mains and press To start vacuuming, push
on/off switch. cleaner head down with foot
and pull handle towards you.
Anti-jam brushbar
(Not available on silver/yellow model).
1 1 Manual brush off
for delicate rugs and floors.
2
2 Brush off
when upright.
3 3 Auto brush on
for normal cleaning.
A
1

Using the tools

Ensure machine is in upright Press wand release button and
position before using tools. remove wand.
Press wand release catch 1 to B Hose mode
release ready-to-go hose and Fit tools directly on end of
slide wand to end of hose. hose. For confined spaces
such as car cleaning.
A Wand mode
Slide back wand cap and
place tools directly on to
wand handle.
NB You can twist the brush and
stair tool heads to make
cleaning easier.
B
C
C
Reverse wand by inserting Stair cleaning
wand handle into hose. Always work with the
machine at the bottom of
C Reversed wand mode
the stairs.
Fix tools, floortool or
groomer (see back page) Powerful suction can
on to end of wand. For cause the hose to 'pull
hard to reach areas. back' in use – please
take extra care when
Ensure wand cap is
cleaning stairs.
closed, unless using with
tools.