Table of Contents
Advertisement
14 Troubleshooting
If GoGear Aria is not working properly or the
display freezes, you can reset it without losing
data:
How do I reset GoGear Aria?
•
Insert a pen tip or other object into
the reset hole located at the bottom of
GoGear Aria. Hold until the player shuts
down.
•
If the reset option is unsuccessful, follow
the steps how to recover GoGear Aria
with the Philips Device Manager:
1
On your computer, select Start >
Programs > Philips Digital Audio Player
> Aria Device Manager > Philips Device
Manager to launch the Philips Device
Manager.
2
Turn off GoGear Aria before you
continue.
3
Press and hold the volume button
while you connect GoGear Aria to your
computer.
4
Keep holding the key until the Philips
Device Manager acknowledges GoGear
Aria and enters the recovery mode.
5
On the computer, click the Repair
button and follow the instructions of the
Philips Device Manager to complete the
recovery process.
6
When the recovery is completed,
disconnect GoGear Aria from your
computer.
7
Restart GoGear Aria.
EN
21
Advertisement
Table of Contents
