Update GoGear Vibe
Ensure that your computer is connected to the Internet.
1
2
Connect GoGear Vibe to the computer (see section
and charge for instructions).
3
On your computer, click
Audio Player > Vibe Device Manager to launch Philips
Device Manager.
4
Click
Update.
>
Philips GoGear Vibe Device Manager
and installs new firmware from the Internet, if available.
5
When the display shows
6
Disconnect GoGear Vibe from the computer.
>
GoGear Vibe restarts after the firmware is updated and is ready
for use again.
Start > Programs > Philips Digital
Update completed, click OK.
Connect
checks for updates
15