Philips DC290B/37 Quick Start Manual page 2

2
Setup
Set time and date » [AL 1] or [AL 2] begin to blink.
A
3 Press SOURCE on the top panel to
1 In standby mode, press and hold SET
select an alarm sound source: iPod/
TIME/PROG for 2 seconds.
iPhone, FM tuner, or buzzer.
» Hour digits start to blink.
4 Press ALM 1 or ALM 2.
2 Press OK/ to select the 12/24 hour
» The hour digits begin to blink.
format.
5 Press /
3 Press / to set the hour.
6 Press ALM 1 or ALM 2 to confirm.
4 Press SET TIME/PROG to confirm.
» The minute digits begin to blink.
» The minute digits begin to blink.
7 Repeat steps 5-6 to set the minute.
5 Repeat steps 3-4 to set the minute,
8 Repeat steps 5-6 to select whether
year, month, and day.
to ring alarm the whole week, on
weekdays, or at weekend.
B Set the alarm timer
9 Repeat steps 5-6 to set the alarm volume.
You can set two alarms which go off at
E Tip
different time.
• If you set iPhone/iPod playlist as the sound
1 Ensure that you have set the clock
source, you must create a playlist in iTunes
correctly.
called "PHILIPS" and import it to your
2 Press and hold ALM 1 or ALM 2 for
iPhone/iPod.
2 seconds.
• If no playlist is created in the iPod/iPhone
or there is no song in the playlist, the unit
will wake to songs in the iPod/iPhone.
2
Setup
Activate and deactivate the alarm timer
1 Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
» If the timer is activated, [ AL 1]
or [ AL2] is displayed.
» If the timer is deactivated, [
or [ AL2] disappears.
repeatedly to set the hour.
Repeat alarm
1 When the alarm rings, press
BRIGHTNESS/REP ALM.
» The alarm repeats ringing minutes
later.
E Tip
» You can press /
to repeat alarm.
Stop alarm ring
1 When the alarm rings, press the
corresponding ALM 1 or ALM 2.
» The alarm stops but the alarm
settings remain.
2 3
Enjoy
A Play from iPod/iPhone
1 Lift up the iPhone/iPod dock on the
top panel.
AL1]
2 Place the iPhone/iPod into the dock.
to adjust the interval
2 3
Enjoy
B Program and listen to
3 Press iPhone/iPod to select iPod/
radio stations
iPhone source.
» The connected iPod/iPhone
1 In the tuner mode, press and hold
plays automatically.
SET TIME/PROG for more than
• To pause/resume play,
2 seconds to activate automatic
press OK/ .
program mode.
• To skip to a track,
» [AUTO] (auto) is displayed.
press / .
» All available stations are
• To search during play,
press and hold / ,
then release to resume
» The first programmed
normal play.
• To go back to the previous
iPod/iPhone menu, press
2 Press /
MENU. To scroll through
number.
the menu, press / .
• To confirm a selection,
E Tip
press OK/ .
• Detailed functions and features are
» If no key is pressed for
described in the user manual.
more than 10 seconds,
OK/ acts back as the
play/pause key.
programmed in the order of
waveband reception strength.
radio station is broadcast
automatically.
to select a preset