Getting Started; Cord Storage - Dyson DC 01 Operating Manual

1. Getting started

Assemble the machine as follows:
Wand & hose assembly
Push yellow hose cuff firmly over wand end with twisting motion.
1
1
2
3
4
click
On/Off switch
Guide wand into hose, keeping it
straight.
Locate wand handle into socket from
above.
Push home until it 'clicks' into place.
2
Ensure hose does
not kink when
replacing wand
Insert tool on to end of wand
4
as shown.
For cleaning awkward places
5
remove wand and insert tool
adaptor into end of hose.
Attach tool as
required.
5
Tool adaptor
P L E A S E R E A D A L L I N S T R U C T I O N S C A R E F U L LY
BEFORE USING YOUR DYSON VACUUM CLEANER.
Accessory tool location
All tools are stored neatly on the tool storage posts.

Cord storage

Wrap cord around both cable winders.
Cleaner head adjustment
Hold the cleaner head down with foot
and tilt machine back.
Cleaner head adjusts
automatically to
correct height.
Tool adaptor
Rotate top
quick-release
cable winder...
...to release cable.