[SHOOTING GUIDE]
Message is displayed when this unit is moved rapidly.
: [RECORD SETUP] # [SHOOTING GUIDE] # [ON]
MENU
When "CAMERA PANNING IS TOO FAST." appears, move the unit slowly while recording.
≥ Set to [OFF] to turn off the message indication.
≥ Message will not appear while pausing the recording. (Message will appear even if it is
pausing the recording if [DEMO MODE] is set to [ON].)
[WIND NOISE CANCELER]
This will reduce the wind noise coming into the built-in microphones while maintaining the
realism.
≥ Switch to Manual Mode. (l 77)
: [RECORD SETUP] # [WIND NOISE CANCELER] # [ON]
MENU
≥ This function's default setting is [ON].
≥ When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and
the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
[ZOOM MIC]
Directivity of the microphone is synchronized with the zoom operation. Sounds near the front
of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
: [RECORD SETUP] # [ZOOM MIC] # [ON]
MENU
71
VQT3W31