Ebeam Edge Setup - Luidia NP01Wi1 Manual

eBeam Edge(TM) Setup
For your eBeam Edge Bluetooth receiver to work properly, you must have Windows XP SP2
or later, Vista, or 7.
Set up a Bluetooth Wireless connection to the receiver
1. Plug the Bluetooth USB key that came with your eBeam Edge product into a USB port on
your PC. Two events should occur:

The Windows New Hardware Setup message should appear in your taskbar telling you
that the device has been detected.

A Bluetooth icon should appear in your taskbar.
2. Right click the Bluetooth icon in your taskbar and select Add A Bluetooth Device.
3. Complete the Add Bluetooth Device Wizard.
a) Make sure My device is set up and ready to be found is checked. Click Next.
The Windows operating system will search for Bluetooth devices.
b) Select your eBeam device from the list. Click Next.
c) Select Use the passkey found in the documentation and type in 1234. Click
Next.
The Windows operating system will now install the eBeam Bluetooth receiver.
d) Click Finish.
4. Launch the software. The software will automatically detect the Bluetooth receiver.
© 2011 Luidia, Incorporated
Page 20