Adjusting The Position And The Size Of Projected Screen - NEC DLP Cinema NC2000C User Manual

3-4. Adjusting the position and the size of projected screen

3-4-1. Displaying the test pattern
1
Press the MENU button, or select a test pattern from signal selection buttons (button <1> to <8>).
If you register the test patterns to the signal selection buttons (<1> to <8> buttons), select the test pattern according to
"3-3. Selecting the title of input signal (See page 22)".
KEY
LOCK
DOUSER
ENTER
5 EXIT
MENU
1 6 LAMP
2 7 IMB
3 8
4
2
Press the LEFT/RIGHT button to display "Title Select" on the LCD screen.
3
Press the DOWN button.
The title of the input signal is displayed.
4
Press the LEFT/RIGHT button to display "TEST Pattern" on the LCD screen.
5
Press the DOWN button.
The LCD screen enters the mode where you can select a test pattern.
6
Press the LEFT/RIGHT button.
This switches the test pattern name displayed on the LCD screen.
3. Projection of Images (Basic Operation)
23