NEC P232W-BK User Manual page 23

DVI LONG CABLE
(DVI input only)
HDMI LONG CABLE*
(HDMI input only)
Tag4 AUTO ADJUST*
(Analog input only)
SIGNAL ADJUST
(Analog input only)
AUTO ADJUST
LEVEL
(Analog input only)
A-NTAA SW
(Analog input only)
AUTO CONTRAST*
(Analog input only)
CONTRAST
(Analog input only)
AUTO BLACK LEVEL*
(Analog input only)
BLACK LEVEL
(Analog input only)
VIDEO LEVEL*
(HDMI input only)
Tag5 H.POSITION
V.POSITION
H.SIZE
(Analog input only)
*1 Only for P232W
*2 This item does not reset by FACTORY PRESET (Tag7).
Compensates for image degradation caused by using a long DVI cable.
There are 4 possible settings, with "0" being the lowest level of compensation and "3"
being the highest level. The default setting is "1".
1
Compensates for image degradation caused by using a long HDMI cable.
There are 4 possible settings, with "0" being the lowest level of compensation and "3"
being the highest level. The default setting is "1".
2 Automatically adjusts the Image Position and H.SIZE settings and FINE settings.
Press "SELECT" to activate Auto Adjustment. Please use test pattern, which is included
in the enclosed CD-ROM.
Determines when the auto adjustment is activated automatically.
The choices are "SIMPLE" and "FULL". Press "LEFT" or "RIGHT" to select.
H-size, Fine, H/V Position
SIMPLE
FULL
O: Automatic Adjustment
NOTE: Automatic Adjustment does not work at resolutions less than 800x600 resolution.
Determines the automatic adjustment level for AUTO ADJUST. The choices are "SIMPLE",
"FULL" and "DETAIL". Press "LEFT" or "RIGHT" to select. Refer to the below table.
Size, Fine, Position
SIMPLE O
FULL O
DETAIL* O
O: Automatic Adjustment
* "DETAIL" activates automatic long cable (skew, peaking) adjustment.
The Advanced No Touch Auto Adjust function is able to recognize new signals even
when neither the resolution nor the refresh rate has changed. If several PCs are
connected to the monitor, and each transmit very similar (or even the same) signals in
terms of resolution and refresh rates, the monitor recognizes that there is a new signal
and automatically optimizes the picture without the need for any action on the part of the
user.
OFF: A-NTAA is disabled.
ON: If a change in signal is detected A-NTAA will adjust the monitor to the optimal
settings for the new signal. If no change in the signal is detected then A-NTAA does not
activate. The screen will be blank while the monitor optimizes the signal.
OPTION: Functions the same as ON, except that the screen does not go blank when the
monitor makes adjustments for changes in signal, allowing the monitor to display the new
signal faster. When using an external switching device to connect 2 or more PCs to the
monitor, using the ON or OPTION settings is suitable.
2 Adjusts the image displayed for non-standard video inputs. Press "SELECT" to adjust.
Any adjustment requires the image to have white portions.
Adjusts the image brightness and contrast in relation to the background.
Press "LEFT" or "RIGHT" to adjust.
2
Automatically adjusts the black level. Any adjustment requires the image to have black
portions. Press "SELECT" to activate AUTO ADJUST.
Adjusts the RGB black level by input signal level.
1 NORMAL: For computer setting. Displays all input signals of 0-255 steps.
EXPAND: For audio-visual equipment setting. Expands input signals of 16-235 steps to
0-255 steps.
AUTO: Auto setting depending on the input signal.
Controls Horizontal Image Position within the display area of the LCD.
Press "LEFT" or "RIGHT" to adjust.
Controls Vertical Image Position within the display area of the LCD.
Press "LEFT" or "RIGHT" to adjust.
Adjusts the horizontal size of the screen.
If the "AUTO ADJUST" function do not give you a satisfactory picture setting, a further
tuning can be performed using the "H.SIZE (V.SIZE)" function (dot clock). For this a Moiré
test pattern could be used. This function may alter the width of the picture. Use LEFT/
RIGHT Menu to center the image on the screen. If the H.SIZE (V.SIZE) is incorrectly
calibrated, vertical bands will appear. The image should be homogeneous.
Contrast
O X
O O
X: No Automatic Adjustment
Contrast Black Level
X X
O X
O O
X: No Automatic Adjustment
English-21
Time
1 second
1.5 seconds
5 seconds