Setting The Clock; Setting The Clock Automatically; Setting The Clock Manually - LG ND8520 Owner's Manual

Setting the Clock

,
Note
If the power has been interrupted or the
power plug has been disconnected, the clock
setting is erased.
Setting the Clock
Automatically
,
Note
y Make sure that your iPod/iPhone/iPad
or your Android device has set the clock
correctly.
y In standby mode, the clock will not
synchronize with your iPod/iPhone/iPad or
your Android device.
y In auto clock synchronization, "LG Bluetooth
Remote" app has priority over the docking
system.
Setting the Clock by Synchronizing
with Your iPod/iPhone/iPad
Connect the iPod/iPhone/iPad firmly. Then the
clock setting in the control panel will synchronize
with your iPod/iPhone/iPad.
,
Note
The synchronized time may be slightly
different from that of your iPod/iPhone/iPad.
Setting the Clock through "LG
Bluetooth Remote" App
Install "LG Bluetooth Remote" app on your iPod
touch/iPhone/iPad or your Android device. (see
page 27-28)
Your unit's clock will be automatically synchronized
with your device by activating Bluetooth
connection through "LG Bluetooth Remote" app.
ND8520-FA.BGBRLLK_ENG.indd 11

Setting the Clock Manually

If necessary, you can set the clock manually.
1. Press and hold Clock on the back panel for two
seconds.
- The clock digits begin to blink.
2. Press / to select the 12/24 hour format.
- 12:00 (for a PM display) or 0:00 (for a 24 hour
display)
3. Press .
- The hour digits begin to blink.
4. Press / to set the hour.
5. Press .
- The minutes digits begin to blink.
6. Press / to set the minute.
7. Press .
,
Note
If you want to reset the clock, repeat steps 1-7.
Getting Started 11
12. 6. 14.
1
10:57