Selecting Night Mode; Configuring The Home Button To Activate/Deactivate Night Mode; General Garmin Pilot Operating Guidelines - Garmin Pilot User Manual

Selecting Night Mode:

1) Open the iPad Settings Menu.
2) Under the Settings column on the left, touch 'General'.
3) Touch the 'Accessibility' submenu.
4) Touch the ON/OFF sliding switch to 'White on Black' to select/deselect
Night Mode.
Alternatively, the Home Button on the front of the iPad can be configured to toggle
Night Mode on or off with three momentary button pushes in rapid succession (triple-
click).

Configuring the Home Button to Activate/Deactivate Night Mode:

1) Open the iPad Settings Menu.
2) Under the Settings column on the left, touch 'General'
3) Under the General column on the right, touch 'Accessibility'
4) Touch 'Triple-click Home'.
5) Touch 'Toggle White on Black' to place/remove a check mark next to that
selection. A check mark next to the 'Toggle White on Black' indicates the
triple-clicking the home button will toggle night mode ON/OFF.

GENERAL GARMIN PILOT OPERATING GUIDELINES

Garmin Pilot opens in the most recently viewed page. From any page, it is possible
to access any desired feature by touching, flicking, and/or dragging your finger on the
active areas of the display that appear as buttons, slide controls, flick lists, text fields,
or icons. As with most iPad applications, text fields automatically open a QWERTY
keyboard for easy text entry.
Also like other iPad applications that use maps, panning is done by "touch-dragging"
the finger across the display and you can magnify or zoom by either double-tapping the
display or by pinching. Reversing your pinch or taping with two fingers will de-magnify
or zoom out. Additionally, there is no Garmin Pilot input that requires any specific
weight or pressure on the display. In other words, tapping or pressing forcefully on the
glass will produce approximately the same result as a light touch.
190-01501-00 Rev. C Garmin Pilot for iOS User's Guide
Overview
5