Table of Contents
Advertisement
Quick Links
To obtain the best possible performance, install your Transom Mount Intelliducer according to
the following instructions. If you experience difficulty during the installation, contact Garmin
Product Support, or seek the advice of a professional installer.
This Transom Mount Intelliducer provides depth information either to a NMEA 0183-
compatible device, or to your existing NMEA 2000
more information about NMEA 2000, visit www.garmin.com.
WARNING: See the Important Safety and Product Information guide in the product box for
product warnings and other important information.
Product Registration
Help us better support you by completing our online registration today! Connect to our Web site
at http://my.garmin.com. Keep the original sales receipt, or a photocopy, in a safe place.
For future reference, write the serial number assigned to your Intelliducer in the space provided.
The serial number is located on a sticker around the cable.
Serial number
Contact Garmin
Contact Garmin if you have any questions while installing or using your Intelliducer. In the
USA contact Garmin Product Support by phone: (913) 397-8200 or (800) 800-1020, or go to
www.garmin.com/support/.
In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808
2380000 (within the UK).
Packing List and Tools Needed
Before installing your Intelliducer, confirm that your package includes the following items. If
any parts are missing, contact your Garmin dealer immediately.
Standard Package
• Transom Mount Intelliducer (not pictured)
A – 5 mm flat washers (2)
B – 5 × 30 mm screws (2)
C – 10-32 lock nut (1)
D – 4 × 12 mm screw (4)
E – 10-32 × 1.75 in. screw (1)
F –
1
/
in. cable clamps (2)
4
G – Plastic spacer (1)
H –
/
in. rubber washer (1)
1
4
I – Cable tie, 5.6 in. (4)
J – Cable entry cover (1)
K – NMEA 2000 T-connector (1)
(NMEA 2000 Intelliducer only)
March 2008
Transom Mount Intelliducer
Installation Instructions
190-00889-01 Rev. B
network, depending on the model. For
®
A
B
C
D
J
K
Tools Needed
• Drill and drill bits
•
/
in. (9.5 mm) wrench or socket
3
8
• Masking tape
• Number 2 Phillips screwdriver
• Marine sealant
™
G
E
F
H
I
Printed in Taiwan
Advertisement
Table of Contents
