Epson C826091 (PS Card User Manual page 15

For EPL-7000/7100 users
1.
Hold down the SelecType button for several seconds until you
enter SelecType Level 2. A SelecType Level 1 option is displayed
briefly before the printer enters the Level 2 main menu.
2.
Press the A or v button until the "CH CONFIG P,S" menu
appears.
3.
Press the b button to enter the option; one of the submenus
(MODE, I/F, or RX-/BUFFER) appears.
4.
Press the A or v button until the MODE submenu appears. If
this menu is displayed in step 3, ignore this step.
5.
Press the b button to enter the option; one of the options and
the =-3 icon appear.
6. Press the A or v button until the "$ PS" option appears.
7.
Press the b button to set the PS option.
8.
Press the SelecType button once to exit SelecType.
The I'S mode remains in effect until you change the setting or turn
off the printer. If you want to make this setting permanent, use the
"P-CONFIG. SAVE" menu in SelecType Level 2. See your printer
manual.
Handing the PostScript CARD
1-5