Epson PowerLite 1940W Quick Setup Manual

PowerLite 1940W/1950/1960
®

Quick Setup

Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Computer
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows 2000 SP4 or later: After turning on the projector, follow
®
the on-screen instructions to install the EPSON
(EMP_UDSE.EXE; only on first connection).
Note: If the software screen does not display automatically, open My
Computer or Computer, then double-click EPSON_PJ_UD.
Mac OS X 10.5.1 or higher: After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the EPSON USB Display software
(only on first connection).
Monitor port
Connect one end of a VGA cable to the projector's Computer1 or
Computer2 port, and the other end to your computer's
you are using a laptop, switch it to external display (see "Troubleshooting").
You can also connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.
DisplayPort
Connect one end of a DisplayPort cable to the projector's DisplayPort and the
other end to a DisplayPort on your computer.

Wired network

You can connect the projector to your network using an Ethernet
See "Project over a wired network" for instructions.
*412289800*
*412289800*
DisplayPort cable
VGA cable
USB cable
HDMI cable
USB Display software
®
monitor port. If
® cable.

Video device

Connect up to 4 video devices and use the Source Search button on the
projector or remote control to switch between them.
Camera, USB device, or EPSON document camera DC-06
Connect a digital camera, USB flash drive, USB storage device, or EPSON
document camera DC-06 to the projector's USB-A (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's Slideshow feature to project images. See the online User's
Guide for details.
External monitor and external speakers
You can also connect an external monitor and external speakers to your
projector to enhance your presentations. See the online User's Guide for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The power light on the projector turns orange.
3
Open the A/V Mute slide all the way.
RCA video cable (composite video)
Audio cable
Component video to VGA cable
Audio cable
HDMI cable