Do not put the same pan on two
6. CARE AND CLEANING
Refer to "Safety information"
To clean the appliance, deactivate
it and let it cool down first. Before
you clean or do the maintenance
work, disconnect the appliance
from the electrical supply.
Scratches or dark stains on the
surface have no effect on how the
A high concentration of moisture
or immersion of the burners in wa-
ter for too long can cause damage
to their surfaces.
• You can remove the pan supports to
easily clean the hob.
• To clean the enamelled cap, wash it
with warm soapy water and dry it care-
fully before you put it back.
• The crowns of brass burners can dark-
en after long use. To remove the dark
marks, do as follows:
Diameters of cook-
120 - 240 mm
120 - 180 mm
120 - 180 mm
180 - 260 mm
Make sure pot handles do not
protrude over the front edge of
the cooktop and that pots are
centrally positioned on the rings in
order to achieve maximum stabili-
ty and to obtain lower gas con-
Do not place unstable or deformed pots
on the rings to prevent from spill and in-
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
acrylamides can pose a health risk. Thus,
we recommend that you cook at the
lowest temperatures and do not brown
food too much.
– Prepare a mixture of 50% water and
50% wine vinegar.
– Soak the crowns in the mixture for no
longer than 10 minutes. Remove the
marks with a sponge.
– Rinse the crowns in water to remove
the mixture and dry them carefully.
• Wash stainless steel parts with water,
and then dry them with a soft cloth.
• The pan supports are not resistant to
washing in a dishwasher. They must be
washed by hand.
• When you wash the pan supports by
hand, be careful when you dry them as
the enamel coating occasionally can
have rough edges. If necessary, you
can remove stubborn stains with a
• After you clean the pan supports, make
sure that they are in correct positions.
• Make sure that the arms of the pan
supports are in the centre of the burner
for the burner to operate correctly, .