Take The Picture - Canon EOS ELAN 7NE Date Instructions Manual

The Difference Between <S> and <Y>
• The shutter speed and aperture value are set in the same way in both
modes.
• The following features can be used in the <S> mode, but not in the <Y>
mode.
· Manual AF point selection
· Metering mode selection
· Film advance mode selection
· Program shift
· Exposure compensation
· AEB
· AE lock with the <j> button
· Depth-of-field preview
· Multiple exposures
About Program Shift
• In the Program AE mode, you can freely change the shutter speed and
aperture value combination (program) set by the camera while retaining the
same exposure. This is called program shift.
• To shift the program, press the shutter button halfway and turn the <l>
dial until the desired shutter speed or aperture value is displayed.
• Program shift is canceled automatically after the picture is taken.
• Program shift cannot be set when the built-in flash is used.
4

Take the picture.

•
Compose the shot and press the
shutter button fully.
• If the "K" shutter speed and maximum aperture
display blink, it means the subject is too dark. Use
flash.
• If the "D" shutter speed and minimum aperture
display blink, it means the subject is too bright. Attach
an ND filter (sold separately) to reduce the light
entering the lens.
· Custom Functions
· Built-in flash manual firing
· EX-series Speedlite compatibility
- FE lock
- High-speed sync (FP flash )
- Flash ratio control
- FEB
- 2nd-curtain sync
- Modeling flash
55