Table of Contents
Advertisement
specting the
dryer
nnecting the
mains plug
oading laundry
asket"
he programme
1
drying programme ...
2
idual requirements
e sensitive and only
uched lightly.
3
Start/Stop button
the dryer with
nserted!
0, 1, 2, 3
Drying
Condensation container
Control panel
Drum interior light
(depending on model)
Maintenance
Air inlet
flap
Fluff filter
Drum
Drying
Emptying condensation
Empty container after each drying operation!
1.
Pull out condensation container keeping it horizontal.
2.
Pour out condensation.
3.
Always push container in fully until it clicks into place.
If Container flashes in the display panel
What to do if..., Page 10.
Cleaning the fluff filter
Clean the fluff filter after each drying operation.
1.
Open the door, remove fluff from door/door area.
2.
Pull out and fold open the fluff filter.
3.
Remove the fluff (by wiping the filter with your hand).
If the fluff filter is very dirty or blocked, rinse with warm water and dry
thoroughly.
4.
Close and reinsert the fluff filter.
Switching off the dryer
Turn the programme selector to Off.
Do not leave laundry in the dryer.
Removing the laundry
The automatic anti-crease function causes the drum to move at specific intervals, the washing remains
loose and fluffy for an hour (two hours if the additional
depending on model).
Programme end
once lights up in the display.
Interrupt programme
removing or adding laundry.
The drying cycle can be interrupted for a brief period so that laundry may be added or removed.
The programme selected must then be resumed and completed.
Never switch the dryer off before the drying process has ended.
Drum and door may be hot!
1.
Open door, the drying process is interrupted.
2.
Load or remove laundry and close door.
3.
If required, select a new programme and additional functions.
4.
Press the
Start/Stop button.
3
Reduced Ironing function is also selected-
4
Advertisement
Table of Contents
