Download  Print this page

About This Guide - Asus WL-330N User Manual

Portable wireless n router.
Hide thumbs

Advertisement

Table of Contents
MPE Statement
Your device contains a low power transmitter. When device is transmitted it sends
out Radio Frequency (RF) signal.
Caution Statement of the FCC Radio Frequency Exposure
This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C
and found compliant to the requirements as set forth in CFR 47 Sections 2.1091,
2.1093, 15.247(b)(4) addressing RF Exposure from radio frequency devices. The
radiation output power of this Wireless LAN device is far below the FCC radio
frequency exposure limits. Nevertheless, this device shall be used in a manner that
the potential for human contact during normal operation - as a mobile or portable
device but use in a body-worn way is strictly prohibited. When using this device, a
certain separation distance between antenna and nearby persons has to be kept
to ensure RF exposure compliance. In order to comply with the RF exposure limits
established in the ANSI C95.1 standards, the distance between the antennas and
the user should not be less than 20cm.
RF Exposure
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

About this guide

This user guide contains information that you need to install and configure your
ASUS WL-330N.
How this guide is organized
This guide contains the following parts:
Chapter 1: Product introduction
This chapter describes the physical features of the ASUS WL-330N. This
part also presents the package contents, LED indicators, and recommended
network settings.
Chapter 2: Hardware installation
This chapter provides information on how to install the ASUS WL-330N.
Chapter 3: Utilities
This chapter provides information on how to configure the ASUS WL-330N
using the utilities available from the support CD.
vii

Advertisement

Table of Contents

   Also See for Asus WL-330N

   Related Manuals for Asus WL-330N

Comments to this Manuals

Symbols: 0
Latest comments: