Asus WL-330N User Manual page 36

General
SSID
The SSID is an identification string of up to 32 ASCII characters that differentiate
the ASUS WL-330N from other manufacturers. The SSID is also referred to as the
"ESSID" or "Extended Service Set ID." You can use the default SSID and radio
channel unless more than one WL-330N is deployed in the same area. In that
case, you should use a different SSID and a radio channel for each WL-330N. All
ASUS Wireless APs/Routers and ASUS 802.11n/802.11g/802.11b WLAN client
adapters must have the same SSID to allow a wireless mobile client to roam. By
default, the SSID is set to "ASUS".
Wireless Mode
This field indicates the 802.11n interface mode. Selecting "Auto" allows 802.11g,
802.11b, and 802.11n clients to connect to WL-330N. Selecting "b/g Mixed" allows
802.11b/g/n clients to connect to WL-330N, but 802.11n clients only run at a speed
of 54Mbps. Selecting "n only" maximizes performance, but prevents 802.11b/g
clients from connecting to your device. Selecting "b only" allows only 802.11b
clients to connect to your device. Selecting "g only" allows only 802.11g clients
to connect to your device. If "b/g Protection" is checked, protection of 11g or 11b
traffic is enabled automatically in the presence of 11g/11b traffic.
4-12 Chapter 4: Configuration