Running A Consistency Check - Asus P8B-C/4L User Manual

4. Use the arrow key to select the disk you would like to configure as hot spare,
then move the cursor to the Hot Spr column. Press <+>, <->, or <Space>.
Press <C> to commit the changes, then select Save changes then exit this
menu. The Drive Status column field now shows Hot Spare.
LSI Corp Config Utility
View Volume -- SAS2008
Volume
Identifier
Type
Size(GB)
Status
Task
Manage Volume
Slot
Num
0
1
2
Esc = Exit Menu
Enter=Select Item

Running a consistency check

To run a consistency check on the RAID volume:
Follow steps 1–3 of the section Viewing volume properties and step 2 of
1.
the section Managing hot spares.
From the Manage Volume screen select Consistency Check, then press
2.
<Enter>.
3. The below screen appears. Press <Y> to start the consistency check on the
RAID volume.
LSI Corp Config Utility
Manage Volume -- SAS2008
Consistency Check of volume may take several hours to complete.
Esc = Exit Menu
Enter = Select Item
5-46
Device Identifier
ATA ST3160812AS E
ATA ST3160812AS E
ATA ST3160812AS E
F1/Shift+1 = Help
Alt+N=Next Volume
Y Start volume consistency check and exit this menu
N Abandon volume consistency check and exit this menu
F1/Shift+1 = Help
v7.07.00.00 (2010.04.30)
1 of 1
LSI Logical Volume 3000
RAID 1
148
Optimal
None
RAID Hot Drive
Disk Spr Status
Yes No Primary
Yes No Secondary No
No Yes Hot Spare No
v7.07.00.00 (2010.04.30)
Pred Size
Fail (GB)
No 148
148
148
Chapter 5: RAID configuration