Dynex DX-24E150A11 Quick Setup Manual

24" LED-LCD TV

QUICK SETUP GUIDE

DX-24E150A11
Remote control Composite video
and cable
2 AAA batteries
TV stand and screws
Quick Setup Guide
WE ARE GOING GREEN!
A copy of the User Guide is not provided in the box
but is available at www.dynexproducts.com
Front features
Remote control
sensor
Power indicator
Volume Menu Power button
+/-
Channel Input
+/-
Installing the stand
1 Remove the stand, stand column, and screws from the box.
2 Lay the TV flat (screen down) on a flat, cushioned surface. Align the bottom side
of the TV with one edge of the table.
3 Insert the stand column into the TV stand and secure it with the three stand
column screws.
Smaller screws (3)
Stand column
4 Align the holes in the stand with the holes on the stand column, then secure the
stand to the column with the larger screw provided.
Important: The wide portion of the stand should go towards the front of the TV.
Large screw
Stand
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Remove the three screws holding the stand column to your TV, then remove the
stand and the stand column.
3 Secure the wall-mount bracket (not included) to the back of your TV using the
four screws provided with the bracket.
Setting up your remote control
1 While pressing the release button on the
battery compartment cover on the back
of the remote, lift the cover off the remote.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and -
symbols on the batteries align with the
+ and – symbols in the battery compartment.
3 Replace the cover.
To program your existing remote control to work with your Dynex TV, see the table
below for common codes. If you have problems programming your remote, or
need a different remote control code, visit www.dynexproducts.com for the latest
remote control code information.
Universal remote control TV codes
(for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models Set-top box makers and models
Philips
RCA One for All Sony Comcast Dish Network Motorola
PHDVD5, PH5DSS,
RCU807 URC-6690 RM-VL600 M1057 VIP508, VIP622 DRC800 Series 3, HD
PMDVR8, PDVR8
115 135 0464 8043 0463 720 0463
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver or game station
Using HDMI (best)
HDMI cable
(not included)
HDMI device
Using component (better)
Component video device
Component
video cable
Component audio cable
(not included)
Note: Cable connectors and jacks are often color-coded. Match the colors when
you connect the AV cable.
Connecting an antenna
Connect a 75 ohm cable (not included) to the ANT/CABLE IN jack on the back of
your TV and the RF OUT jack on the antenna.
75-Ohm coaxial cable
Antenna, cable TV,
or satellite RF jack
Connecting a VCR, camcorder, or game
(good)
Back of VCR
AV cable
Back of camcorder
or game
Note: Cable connectors and jacks are often color-coded. Match the colors when
TIVO DirectTV
you connect the AV cable.
RC23
0091 10463
Connecting to a computer
Back of TV
Audio cable
(stereo mini plugs)
Connecting headphones
Back of TV
Connecting power
Connect the power cable to a power outlet.
Back of TV
Power outlet
Back of TV
Back of TV
Computer
D-Sub cable (analog RGB)
Back of TV
Power cord