1080p Upconvert DVD Player Important safety instructions...2 Features ...6 Setting up your DVD player ...11 Using your DVD player...14 Troubleshooting...22 Maintaining ...22 Specifications...23 Legal notices ...24 90-day limited warranty ...25 Important safety instructions 1 Read these instructions. 2 Keep these instructions.
Page 3
1080p Upconvert DVD Player 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
This number must match your player’s regional code or the DVD cannot play. • If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen. DX-UPDVD2...
1080p Upconvert DVD Player This product incorporates copyright protection technology that is protected by U.S patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
(Play/Pause) Press to begin playback. Press again to pause playback. Press again to resume playback. Press to turn your player on or off. Turns red on standby and green when the player is turned on. DX-UPDVD2 4 5 6 7...
1080p Upconvert DVD Player Back panel Item Description AC power cable HDMI OUTPUT Composite video output Component output (Y Cb Cr) Audio output (left/ right) Coax (digital) audio output Optical (digital) output Function Plug this cable into an AC power outlet.
JPEG pictures. (fast forward) Press to fast forward the DVD or CD. Press repeatedly to step through the fast forward speeds. Press repeatedly to step forward frame by (step) frame in a video. DX-UPDVD2...
Page 9
1080p Upconvert DVD Player Item (Left arrow) DVD MENU AUDIO SUBTITLE REPEAT RESOLUTION OPEN/CLOSE CLEAR SEARCH (stop) Button Function (fast reverse) Press to fast reverse the DVD or CD. Press repeatedly to step through the fast reverse speeds. Press to select menu options or adjust settings.
Select PLAY and press OK to start program playback. Press to open the on-screen display, which provides current status information and where you can change settings and options. Press to step through alternate angles to watch DVD playback, if available. DX-UPDVD2...
If chemicals touch your skin, wash immediately. • If the remote control is not going to be used for an extended period of time, remove the batteries. Setting up your DVD player Unpacking and setting up Package contents: •...
• Best—HDMI video HD DVD playback: Enjoy your entire DVD collection in brilliant high definition format. This DVD player upconverts DVDs to your HDTV's native resolution, whether it's 480i, 480p, 720p, 1080i, and 1080P. HDMI output: Use this output for HD conversion and experience stunning HD images and crisp digital audio.
1080p Upconvert DVD Player Component connection Component cable HDMI connection HDMI cable Component connection with digital audio Component cable Stereo system Audio cable connectors are color-coded. Connect red (audio right) to red and white Audio cable (audio left) to white.
. Your player starts playback at the beginning of the disc. to fast forward through the disc. Each (fast forward) button is pressed, the fast forward motion speed (fast forward) to resume normal playback. (play/pause) DX-UPDVD2 again, then press (stop)
1080p Upconvert DVD Player • During playback, press Press • During playback, press chapter. Each time you press this key you can skip a chapter, back to the start of the disc. • During playback, press chapter. • During playback, press video.
OK to return to normal to select different enlargement ratio, or press the (fast forward) buttons to move the enlarged picture. (Left), or (Right) (Up), (Down), DX-UPDVD2 (fast (Left), or (Right) buttons to...
• Screen Saver—You can choose to have an animated picture on the screen whenever the DVD player is idle for a certain time. • Playback Memory—You can choose to view a disc from the point where it was stopped.
OK to confirm your selection. Options include: • Digital Audio Output—Sets the audio outputs. This DVD player produces two kinds of audio output, Bitstream or PCM. This surround sound format is output to a Dolby Digital/DTS decoder through the coaxial and optical jacks on the back of the player.
1080p Upconvert DVD Player setting of Digital Audio Output is Bitstream and your TV supports Bitstream data, the output will be in Bitstream format. If not, the output will be in PCM format. • Dynamic Range—This function is generally used when playing programs at night, in order to avoid disturbing others.
Page 20
(Left) to return to the previous menu. 5 Press SETUP to exit the on-screen menus. To use the Preferences Setup Page: 1 Press SETUP. The General Setup Page opens. (Up), (Down), (Left), or DX-UPDVD2 (Right) buttons to move the cursor...
Be sure remember the new password. When setting the parental control function you must input the new password. Note: (Initial password: 000000) • Default—Resets to all the manufacturer's original settings for this DVD player Press OK to perform the reset. 4 Press (Left) to return to the previous menu.
Symptom Solution No power Make sure that the DVD player is plugged in and that the AC power connection is secure. No picture • Make sure that the connection between the DVD player and the TV is secure.
1080p Upconvert DVD Player Cleaning discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment. Notices Specifications and features are subject to change without notice or obligation. For service and support call (800) 305-2204. DX-UPDVD2 Resistance: 75 ohm...
If service of Products and parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Dynex Product during the Warranty Period.
Need help?
Do you have a question about the DX-UPDVD2 and is the answer not in the manual?
Questions and answers