Dynex DX-NBKIT20 User Manual page 9

DX-NBKIT20-combo.fm Page 9 Friday, May 6, 2005 4:46 PM
Using the mini RF optical mouse
Troubleshooting
Problem
Mouse does not work
Mouse is not detected
Mouse pointer does
not move properly
Solution
• Make sure that the on/off switch on the mouse is in the On
position.
• Adjust the angle of the receiver.
• Make sure that the batteries are installed correctly.
• Try using a non-reflective mouse pad.
• Repeat the procedure for establishing a connection.
• Make sure that the receiver is plugged into a USB port.
• Make sure that the USB port is configured correctly.
• Check your computer's device manager for resource conflicts.
• Adjust the angle of the receiver.
• Make sure that the batteries are installed correctly.
• Try using a non-reflective mouse pad.
• Repeat the procedure for establishing a connection.
9