Dynex DX-NBKIT20 User Manual page 6

DX-NBKIT20-combo.fm Page 6 Friday, May 6, 2005 4:46 PM
6
Using the mini RF optical mouse
Introduction
This mini radio frequency (RF) optical mouse uses digital radio technology to con-
nect with your computer.
Setting up your mouse
I
NSTALLING THE BATTERIES
To install the batteries:
1 Press the tab on the bottom of the mouse, then remove the cover.
2 Insert the batteries as shown on the diagram inside the battery compart-
ment.
3 Replace the cover.
I
NSTALLING THE RECEIVER
To install the receiver:
• Plug the receiver into your computer's USB port.
E
STABLISHING A CONNECTION
To set up a connection between the mouse and receiver:
1 Push the small on/off switch on the mouse to the On position. The optical
mouse sensor turns red.
Using the mini RF optical mouse