Cisco 3020 - Catalyst Blade Switch Release Note page 26

Documentation Updates
Syntax Description rule
Command Modes Global configuration
Command History Release
12.2(35)SE
Usage Guidelines The ip admission command applies a web authentication rule to a switch port.
Examples This example shows how to apply a web authentication rule to a switchport:
Switch# configure terminal
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# ip admission rule1
This example shows how to apply a web authentication rule to a fallback profile for use on an
IEEE 802.1x enabled switch port.
Switch# configure terminal
Switch(config)# fallback profile profile1
Switch(config)# ip admission name rule1
Switch(config)# end
Related Commands Command
dot1x fallback
fallback profile
ip admission name
proxy http
show ip admission
ip admission name proxy http
Use the ip admission name proxy http global configuration command to enable web authentication.
Use the no form of this command to disable web authentication.
Syntax Description
This command has no arguments or keywords.
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(35)SE and Later
26
Apply an IP admission rule to the interface.
Modification
This command was introduced.
Description
Configure a port to use web authentication as a fallback method for clients
that do not support IEEE 802.1x authentication.
Enable web authentication on a port
Enable web authentication globally on a switch
Displays information about NAC cached entries or the NAC configuration.
For more information, see the Network Admission Control Software
Configuration Guide on Cisco.com.
ip admission name proxy http
no ip admission name proxy http
OL-8918-03