Advertisement
3
MAINTENANCE
3. 2 Cleaning
When necessary, wipe both the interior and exterior of the cabinet
with a damp cloth. Ensure the cabinet is disconnected from the
mains power supply before cleaning the cabinet. Periodic cleaning
of the condenser coil is also recommended.
Condenser coil
The condenser coil MUST be kept clean for efficient and reliable
operation. To ensure trouble free performance, the condenser coil
should be brushed clean once a month and blown clean by qualified
service personnel every six months. The condenser coil is situated
behind the sign unit (see Figure 7). To access the condenser coil:
1. Disconnect the cabinet from the mains power supply.
2. Loosen the sign retaining clip on the top of each side panel and
lift the sign unit up, to disengage from the sign sides.
3. Disconnect the sign plug from the electrical box socket and
remove the sign unit from the cabinet.
4. The condenser coil is now accessible for cleaning.
Condenser Coil
Figure 7: Cleaning the Condenser Coil
SC-650/970
One and Two Door Vertical Chillers
1
INSTALLATION
Sign Plug Socket
3
10
1.1 Safety Information
When using any electrical appliance, safety precautions should
always be observed. Read these instructions carefully and retain for
future reference.
• When used by, or near, young children or infirm persons, close
supervision is necessary. Young children should be supervised
to ensure that they do not play with the appliance.
• Do NOT use this appliance for other than its intended use.
• Do NOT cover the grilles or block the entry or exhaust of airflow
by placing objects up against the refrigeration unit.
• Do NOT probe any opening.
• Only use this appliance with voltage specified on the rating label.
• Ensure adequate ventilation of the SKOPE refrigeration unit.
• Be careful not to touch moving parts and hot surfaces.
• Regulations require that all electrical work be carried out by
authorised persons. For your own safety, and that of others,
ensure this is done.
• If the supply cord becomes damaged, it must be replaced by a
SKOPE authorised service agent, or similarly qualified person,
in order to avoid a hazard.
• If the refrigeration unit is required to be installed or removed
from the cabinet, ensure all necessary safety precautions are
observed.
Warning: Do NOT overload the power supply.
Caution:
Disconnect the cabinet from the mains power supply before
attempting any cleaning or maintenance.
SC-650/970
One and Two Door Vertical Chillers
Advertisement
