5. Replacing Lamp Units
5-1. Remove the old lamp units from the lamp clip, and replace them with new ones.
Be very careful not to break the lamp units when detaching/reattaching them. Keep
dust off the units.
Note: The eight lamp direct illumination system uses 16 CCFTs
(Cold Cathode Fluorescent Tubes) to provide backlighting for
the LCD display.
Small connector
Connected to INV board (GND side)
Lamp unit consists
of two lamps
Large connector
Connected to INV board (HOT side)
2004 LCD Television
Service Instruction
Page 11 of 12