3
MAINTENANCE
3.2 Cleaning
Many commercially available cleaning products contain solvents
that may attack the plastic components of this product and cause
them to crack. It is important to use only warm water and a small
amount of detergent when cleaning this cooler. Do not use abrasive
or corrosive cleaners or boiling water.
• Disconnect the cabinet from the power supply before cleaning.
• When necessary, wipe both the interior and exterior of the
cabinet with a damp cloth.
• Do NOT flush the cabinet with water.
• Clean the door gasket once every three months.
• The condenser coil (located on the back of the cabinet) should
be brushed regularly to remove any dust build up.
• Periodically check the condensation drain hole in the cabinet
liner bottom, to ensure proper drainage of any condensation.
3.3 Advanced Servicing
Advanced servicing should be carried out by an authorised service
agent. Detailed service and spares information is available in the
HB80/110 Service Manual (Part No. MAN6820).
HB80/110 Serene Glass Door Cooler
User Manual
11