Table of Contents
Advertisement
3
MAINTENANCE
3.1 Interior Light
The cabinet interior light is fitted with a 5 Watt fluorescent lamp. To
replace the fluorescent lamp:
1. Disconnect the cabinet from the mains power supply.
2. Remove the light cover by carefully bending out the side clips.
3. Pull the fluorescent lamp out of the lamp holder (see Figure 6).
4. Replace with a maximum 5 Watt fluorescent lamp.
5. Carefully align the side clips on the light cover and fit back into
place (see Figure 5 below).
6. Reconnect the cabinet to the mains power supply.
Light Cover
Fluorescent
Lamp
10
Figure 5: Removing the Light Cover
Figure 6: Replacing the Fluorescent Lamp
HB80/110 Serene Glass Door Cooler
Lamp Holder
User Manual
Advertisement
Table of Contents
