Setting Up Your Hdtv; Attaching The Stand; Wall Mounting Your Hdtv - Vizio VS370E User Manual

Setting Up Your HDTV

!
Read this user manual carefully before installing your HDTV.
!
The power consumption of your HDTV is about 60W. Use the included power cord. When an
extension cord is required, use one with the correct power rating. The cord must be grounded and
the grounding feature must not be compromised.
!
Your HDTV should be installed on a flat surface to avoid tipping.
!
For proper ventilation, you must allow space between the back of your HDTV and the wall.
!
If you want to mount your HDTV on the wall, see "Wall Mounting Your HDTV" for additional
information.
!
Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
!
Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Contact VIZIO for more information on these services at
888-VIZIOCE (888-849-4623) or www.VIZIO.com.

Attaching the Stand

IMPORTANT: The stand of the HDTV must be assembled prior to usage.
1. Place the HDTV face down on a soft and flat surface
(blanket, foam, cloth, etc.) to prevent any damage to the
HDTV.
2. Carefully align and insert the stand to the HDTV neck
(please refer to the illustration to the right).
3. Gently push the stand towards the HDTV until the locking
mechanism locks into place.
4. Insert the provided M6 100mm thumb screws to the bottom
of the stand (as shown below) and tighten by hand.
Version 12/6/2008
Stand Front
7
www.VIZIO.com
VIZIO VS370E User Manual