Using Your Hdtv The First Time - Vizio VS370E User Manual

VIZIO VS370E User Manual

Using your HDTV the first time

1. Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the HDTV, and then plug the
power cord into an AC wall socket.
2. Connect Audio and Video Cables to the HDTV
(see Connecting Equipment on page 14)
3. Turning Power On
Once all the components are connected, press the Power ON button on the side of the HDTV, or
press the Power button on the remote control.
4. Select Input Source
Select the Input Source for the HDTV by pressing the INPUT button on the side of the TV or
using the SOURCE button on the remote control. Pressing this button will cycle you through the
following options: TV, AV 1, AV 2, Component 1, Component 2, VGA, HDMI 1, HDMI 2, and
HDMI 3.
5. Using DTV and TV with an Antenna or Cable
At first power on, the HDTV will have the DTV/TV input selected and will guide through some
setup screens. If it is not the first time the HDTV has been powered on, you will need to select
TV using the SOURCE button on the remote control, the INPUT button on the side of the HDTV,
or directly by pressing the TV button on the remote control and Auto Scan for the available TV
channels.
a. Press MENU on the remote or the side of the
HDTV to bring up the On Screen Display (OSD).
b. Select the SETUP option and press the right
arrow button on the remote control to enter the
SETUP menu.
c. Highlight the AUTO CH SEARCH option and
press right arrow button on the remote to begin
search. Note: You can press EXIT to stop the
channel search.
d. It is also possible to manually add or delete channels from the channel list after using the
Auto CH Search. Highlight the Manual Channel Set option and press the right arrow
button on the remote to open the Manual Channel Set Menu. Press the up and down
buttons on the remote control to select the channel and press the OK button to toggle
between Viewable and Not Viewable selections.
e. Press the Exit button on the remote control to close the OSD and begin watching TV.
NOTE: DTV digital broadcast is not available in all areas. Refer to www.antennaweb.org to get
information about availability in your area, antenna types, and in which direction to point your antenna.
The channel availability through cable depends on which channels your cable operator supplies in Clear
QAM. Consult your cable operator for more information.
22
www.VIZIO.com