Table of Contents
Advertisement
Basic Business Audio System Design Guide
The Basic System Components
Microphones
EV has a complete line of microphones for paging and announcing. The models range from
simple single zone gooseneck paging models to microprocessor controlled stations designed to
route announcements to one or more areas simultaneously.
Signal Routing and Processing
ProAnnounce Signal processing and routing components are extremely flexible to meet any
business audio need. From the comprehensive software functionality to the digital message
manager and easy system control the ProAnnounce components make the installation simple to
specify and install.
Amplification
EV and Dynacord Amplifiers provide exception performance and reliability. The range of
offerings is impressive as well. From the MA series of rack mount mixer amplifiers to the CPS
and ProAnnounce series of power amplifiers any application can be covered.
Speakers
EV offers many installation options for speaker products. From the EVID Premium surface mount
models to the low cost 205/405 series of raw frame ceiling speaker units, we have an option to fit
any installation requirement.
What to Recommend?
In any business audio installation a key part of a well designed job is getting all the steps done
right. Most of these steps must be done in order or the system may turn out to be poorly
designed and won't meet customer expectations. Getting each step right however can lead to
well done installations which will promote additional future business through positive referrals and
satisfied customers.
Step 1 – Know the Job!
Every system specification begins with a survey of the site. The sales engineer, whose job is to
ask the right questions and gather all the information necessary to complete an accurate bid,
normally performs the survey.
At this stage, it is most important to form an accurate picture of the customer's needs. Will the
system be used for paging, background music, or both? Do pages originate from a single
location, or from multiple locations? Must the system be tied into the customer's telephone
network? Should the system be divided into multiple zones with separate volume controls? If so,
should pages be routed to all zones, or should zones be separately addressable? Should zone
controls be located at the rack, or is local control required? The answers to questions like these
will determine major aspects of the system design.
Talking to individual users of the proposed system will help to reveal important design details. Is
the maitre d' hotel's station located directly under a speaker? If so, then an independent local
volume control should be provided for that speaker, so that it can be adjusted to allow
conversation with patrons. Will the person issuing pages be sitting under or near a speaker? If
so, then consider equalization, or a separate muting circuit, to avoid feedback. Is light-switch
height a comfortable location for zone volume controls, or does the user have another
ElectroVoice/Dynacord BGM Guide
Page 14
Advertisement
Table of Contents
