Control Panel
Terminals
11
12
Note for USB terminal
•
User should not connect any devices to the USB terminal such as digital
camera, keyboard, mouse, etc. (because these will not work).
•
The software update is, in most cases, handled by an authorized service
person or in some circumstances the user may be asked to do the software
update themselves.
1 VOLUME + / -
Press to adjust the volume or
move right (+) / left (–) through the main menu items.
1
2 MENU
3 CHANNEL + / -
2
Press to select channels or
move up (+) / down (–) through the main menu items.
3
4 POWER
Press to turn the unit on and go to the standby mode.
To completely turn off the unit, you must unplug the AC
4
power cord.
5
5 Infrared sensor window
6
Receives infrared rays transmitted from the remote
7
control.
6 POWER indicator
Lights up green when power is on.
7 STAND BY indicator
Lights up red when the unit goes to standby mode.
Side Panel
8
8 HDMI 3 Input jack
9
9 USB terminal
Use this terminal only to play back the MP3 music and
the JPEG picture files stored on a USB flash memory
device, or when software update is needed.
10 S-Video / Composite Video / Audio (L/R)
Input jacks for VIDEO 2
10
Rear Panel
11 Cable management
12 AC power cord Inlet
13
13 HDMI 2 Input jack
14
14 HDMI 1 Input jack
HDMI connection for HDMI or DVI device.
When you connect your PC that has a DVI terminal,
15
you can enjoy this unit as a PC monitor.
16
15 Antenna Input jack
16 S-Video / Composite Video / Audio (L/R)
17
Input jacks for VIDEO 1
18
17 Component Video and Audio (L/R) Input jacks
19
20
18 Digital Audio Output jack
19 Analog Audio (L/R) Output jacks
20 Analog Audio (L/R) Input jacks for HDMI 1
Audio cable connection from a DVI device.
When you connect your PC that has a DVI terminal,
use a stereo mini plug conversion cable as well.
(For HDMI 1 Input jack only)
English
➠
p. 17
➠
p. 19
➠
p. 16
➠
p. 15
p. 9, 10
➠
p. 14
➠
p. 11, 12
➠
➠
p. 14
➠
p. 14
➠
p. 9, 10
➠
p. 9, 10, 13
➠
p. 9
➠
p. 11, 12
➠
p. 9, 11
➠
p. 12
➠
p. 12
➠
p. 10, 13
7
EN