Control Panel
Terminals
10
11
Note for service terminal
*
service terminal (service use only)
•
Use this terminal only when a software update is necessary.
•
User should not connect any devices to the service terminal such as digital
camera, keyboard, mouse, etc. (because these will not work).
•
The software update is, in most cases, handled by an authorized service
person or in some circumstances the user may be asked to do the software
update themselves.
1 VOLUME + / -
Press to adjust the volume or
move right ( + ) / left (–) through the main menu items.
1
2 MENU
3 CHANNEL + / -
2
Press to select channels or
move up ( + ) / down (–) through the main menu items.
3
4 POWER
5 Infrared sensor window
4
Receives infrared rays transmitted from the remote
control.
5
6 POWER indicator
6
7
Lights up green when power is on.
7 STAND BY indicator
Lights up red when power is off.
Side Panel
8 HDMI 3 Input jack
8
9 S-Video / Composite Video / Audio (L/R)
Input jacks for VIDEO 2
*
Rear Panel
10 Cable management
11 AC power cord
r
12 HDMI 2 Input jack
9
13 HDMI 1 Input jack
HDMI connection for HDMI or DVI device.
When you connect your PC that has a DVI terminal,
you can enjoy this unit as a PC monitor.
14 Antenna Input jack
15 S-Video / Composite Video / Audio (L/R)
12
13
Input jacks for VIDEO 1
16 Component Video and Audio (L/R)
Input jacks
14
17 Digital Audio Output jack
15
18 Audio (L/R) Output jacks
16
19 Audio (L/R) Input jacks for HDMI 1
17
Audio cable connection from a DVI device.
18
When you connect your PC that has a DVI terminal,
use a stereo mini plug conversion cable as well.
19
(For HDMI 1 Input jack only)
p. 17
➠
p. 19
➠
p. 16
➠
p. 15
➠
p. 9, 10
➠
p. 11, 12
➠
p. 14
➠
Inlet
p. 14
➠
p. 9, 10
➠
p. 9, 10, 13
➠
p. 9
➠
p. 11, 12
➠
p. 9, 11
➠
p. 12
➠
p. 12
➠
p. 10, 13
➠
English
7
EN