LG 23LS7DC - - 23" LCD TV Owner's Manual page 28

Screen Setup for PC mode
Overview
When the RGB input of the set is connected to a PC output, select
the RGB-PC as the main input mode.
When HDMI connect to PC output and select HDMI/DVI input, this
function is used.
After connecting RGB-PC or HDMI/DVI to PC ouput and checking
the screen quality.
When you change the resolution, select the proper resolution in pre-
sent input to see the best picture appearance.
Adjustment for screen Resolution, Position, Size,
and Phase
O
Press the ADJUST button and then use • or • button to
select Resolution, Position, Size, or Phase.
Press the ENTER button and then use • • 4 • button to
make appropriate adjustments.
• The Phase adjustment range is -1 6 ~ +1 6.
In HDMI/DVI-PC mode, Phase is not available.
• The Size adjustment range is -3 0 ~ +30.
In HDMI/DVI-PC mode, Size is not available.
Press the ENTER button.
Initializing (Reset to original factory values)
@@@
Resolution This function allows you select
resolution of XGA/WXGA.
Position This function is to adjust picLure to
left/right and up/down asyou prefer.
Size This function is to minimize any ver-
tical bars or stripes visible on the
screen background. And the hori-
zontal screen size will also change.
Phase This function allows you to
remove any horizontal noise and
clear or sharpen the image of char-
acters.
m
x
m
_o
z
m
_D
c
m
z
m
c
To initialize the adjusted values
0
Press the ADJUST button and then use • or • button to
select Reset.
Press the ENTER button and then use _1 or • button to
select Yes.
Press the ENTER button.
@@@
27