EXTERNAL EQUIPMENT SETUP
To prevent the equipment
damage, never plug in any power cords until you have finished connecting
all equipment.
HD RECEIVERSETUP
This TV can receive Digital
Over-the-air/Cable
signals without
an external
digital
set-top
box. However, if you
do receive digital
signals from a digital
set-top
box or other
digital external
device, refer to the figure as shown
below.
When connecting
Component
cable
1. How to connect
Connect
the video outputs
(Y, PB, PR) of the digital set
top box to the COMPONENT
IN VIDEO
jacks on
the set. Match the jack colors
(Y = green, PB = blue, and PR = red).
Connect
the audio output
of the digital set-top
box to
the COMPONENT
IN AUDIO
jacks on the set.
2. How to use
,,l_ Turn on the digital set-top
box.
(Refer to the owne(s manual for the digital set-top box. operation)
,,l_ Select Component
input source by using the INPUT
button
on the remote control.
m
x
z
m
c
z
m
c
17