Step 4: Locate the drive identified by the square or triangle symbol, identified by the
Step 5: Use the Phillips blade screwdriver to completely remove the fasteners of the failed
Configuring Drives (Dual Drive Units Only)
Figure 126:
Unit Cover Removed
triangle or the square on the drive connectors. (See the section above on
Identifying a Failed Drive for further information.)
drive.
•
Remove the fasteners indicated by the orange arrows to remove the drive
identified by the triangle symbol.
•
Remove the fasteners indicated by the blue arrows to remove the drive
identified by the square symbol.
Figure 127:
Failed Drive Identification
Maxtor Central Axis Admin User Guide
83