Clear Dial Tone Adjustment; Microphone Volume Adjustment; Choosing The Audio Mode - Jabra GN8210 - Headset Amplifier User Manual

3.2 Clear dial tone adjustment

In order to hear a dial tone, you must select the telephone termi-
nation setting. Complete the following:
1. Put on your headset. Make sure that the headset/handset
switch (H) is set to headset position, and volume (G) is set
to mid-range.
2. Remove the telephone's handset from the telephone and lis-
ten for a dial tone in your headset.
3. If there is no dial tone or it is not clear, stepwise slide the
termination switch (I) through all 9 settings (along the "A-I"
range), listening for the clearest possible dial tone. If the dial
tone is just as clear in position "A" as in position "I", leave the
switch in position "A".
4. When you hear the clearest dial tone, you have located the
correct termination setting.

3.3 Microphone volume adjustment

Adjust the volume of transmitted sound according to an appropri-
ate level. You will need to make a call to adjust the volume.
Complete the following instructions to adjust the volume:
1. Put on your headset and make sure that the microphone is
placed 2 cm from your mouth, and that mute switch (F) is set
to talk position.
6
1558-979_RevA_20-06-2004_10sprog.indd 6-7 1558-979_RevA_20-06-2004_10sprog.indd 6-7
2. Make a telephone call to someone who will act as your test
person.
3. While speaking, adjust the microphone volume adjustment con-
trol (D) until your test person hears your voice at an appropriate
level. If you start hearing an echo of your own voice, adjust the
control to a lower level.

3.4 Choosing the audio mode

The GN 8210 operates in one of three user-selectable audio modes to match individual
protection needs and sound quality preferences.
The three audio modes for customised sound enhancement and protection setting:
Europe and Asia/Pacifi c only:
AUDIO MODE
A TrebleBoost • pitch
• high tones accentuated
B CrystalClear • level
• all tones accentuated
C TT-4 • bass-rich
• low tones accentuated
PROTECTION
• advanced protection
• EU Health and Safety compliant
• enhanced protection
• EU Health and Safety compliant
• Superior
• TT4 compliant
7
21-06-2004 11:29:11 21-06-2004 11:29:11