Table of Contents
Advertisement
Set Clock
In the standby mode, press the OPEN/CLOSE button on the main unit to display the active setting interface,
press the STOP/PLAY/PAUSE button on the unit to move the cursor left/right, press CH+/- to change
character, press MODE to confi rm new time settings.
Press OPEN/CLOSE to display clock under any living mode.
Radio Operation
Basic Operation
1.
Connect the AM or FM attenna and the power source. Refer to the "Cable Connections" section for
details
2.
Press MODE to select the radio mode. Press the FM/AM button on the remote or the PLAY/PAUSE
button on the main unit to select AM/FM band.
3.
Tune Frequency
Repeatedly press TUN+/- on the remote or PLAY/PAUSE/STOP on the main unit to tune up/down
frequency. Briefl y press the STOP button on the remote or press and hold STOP button on the main
unit to exit tuner mode.
4.
Search Through Band
Press and hold TUN+/- on the remote or CH+/- on the main unit to search the entire band and it will
stop at the captured channel, or you can briefl y press the TUN+/- button on the remote or the STOP
button on the main unit to stop searching.
5.
Listen to the preset channel.
Briefl y press the CH+/- button on the remote /main unit to listen to the preset channels.
There is no channel preset in the memory location upon the initial use.
Refer to "Program Channels" section below for how to program channels.
Program Channels
Auto Program
Press Auto on the remote to start auto program. The captured channels will be saved automatically into the
memory location overwriting the previous one.
Manual Program
•
Locate the station you want to save, using the TUN+/- button on the remote or the PLAY/PAUSE/STOP
button on the main unit.
•
Press the Memory button on the remote or the OPEN/CLOSE button on the main unit to assign a
channel number to the selected program, and then press the Memory button on the remote or the
OPEN/CLOSE button on the main unit again to confi rm. If you want to quit the attemp to save, briefl y
press the STOP button on the remote or press and hold the STOP button on the main unit.
•
To delete the preset channel, press CH+/- to locate the channel you want to erase, briefl y press the
Clear button on the remote or press and hold the STOP button on the main unit to erase, and then
press the OK button on the remote or the OPEN/CLOSE button on the main unit to confi rm.
DVD Operation
•
Connect the power source, turn on the unit. Press MODE to set the player into the DVD mode.
•
Press Open/Close to open the disc room. Place a disc onto the holder with the label side facing up,
close the disc room.
•
Press PLAY/PAUSE to start playing. Press STOP to stop. Press VOL +/- to adjust the volume.
Usually a DVD disc contains a root menu. The root menu appears once the data is recognized by the
player. Press the direction buttons to select a fi le in the root menu, press PLAY/PAUSE to start playing.
Some discs are recorded without the root menu and start playing automatically.
During playback, press the MENU button to return to the root menu, press the TITLE button to access
the title menu.
•
Use the AUDIO button to select the available audio language, use SUBTITLE button to display the
subtitle.Some discs are recorded with multi-angle, use the ANGLE button to access the desired
viewing angle.
BASIC OPERATIONS
13
Advertisement
Table of Contents
