Control Inputs; Online Control / Status - Dynacord DRM 4000 Owner's Manual

7.4.5 Online Control / Status

This window allows remotely controlling and monitoring the DRM 4000 in real-time. It also offers the
possibility to test the active control input configuration without the need for additional hardware. An active
RS-232-connection between your computer and the DRM 4000 is necessary to be able to access this
functionality. For details on individual parameters, please refer to chapter 8 "BASIC CONFIGURATION".

Control Inputs

View Status
Activating "View Status" displays for all parameters the momentarily
active state of the DRM 4000. The green LED's next to the corresponding
soft keys indicate the momentarily active control inputs.
Test
Activating "Test" allows the simulation of setting control inputs by pres-
sing the according soft keys. The green LED's next to the corresponding
soft keys indicate the momentarily active control inputs and parameter
fields as well show the actual active status of the DRM 4000. The mixer
behaves as if a control input had been set via hardware. As long as the
DRM 4000's test mode is active, actually setting control inputs via
hardware does not show any effect. When canceling the RS-232-con-
nection between computer and DRM 4000, automatically cancels the
test mode after approximately 3seconds. The DRM 4000 returns to
normal operation mode.
Remotely controlling the DRM 4000 is independent of the fact whether
"View Status" or "Test" has been activated or not, as long as the RS-232
connection is active.
7-6
SOFTW A R E E D ITOR DRM 4000